IntelliGen HP

COMING SOON
IntelliGen HP is a high-power Starter/Generator controller with power distribution and battery charging designed by Power4Flight specifically for use in UAS applications.

Hardware Features

• 120V active 3-phase FOC boost rectification for BLDC generators
• Switched high voltage output for battery charging or high-power loads
• 28.5 / 25V (8S LiFePO4 or 6S LiPo) 60A regulator with battery-backed input and output
• Real time adjustable current limit for the 28.5 / 25V regulator to manage generator load
• Dual 16A regulated outputs with battery-backed inputs; selectable 12V or 6V
• 28.5 / 25V 60A switched output for heaters or other loads
• Hall sensor inputs for robust commutation and engine starting
• Generator phase, high voltage, regulator, battery, and switched-out current and voltage measurements
• FET and regulator internal temperature measurements
• Generator and high voltage battery thermistor and thermocouple inputs
• Shore power / high voltage battery input
• CAN and Serial communications
• Selectable CAN termination
• Spare inputs and outputs for future expansion
• Weight: Estimated @ 1Kg (35.2oz)
• Size: 198mm x 132mm x 43mm (7.8” x 5.2” x 1.7”)

Software Features

• Configurable charging output for high voltage eVTOL lift packs, 12S to 28S
• Engine starting via high voltage batteries
• Power augmentation using high voltage battery to increase engine shaft power
• Field Oriented Control for improved efficiency and reduced current ripple
• Sophisticated and robust firmware designed for aerospace applications
• Configurable for a variety of use cases and generator designs
• Automatic load shedding to protect the engine and/or generator
• Thermal derating to protect generator and/or IntelliGen
• Choice of hall sensors and/or sensorless commutation with automatic failover
• Free communications specification, software developer’s kit, and user interface
• Interoperates with IntelliJect ECU